The cabinet comes standard with a Single Left Door Enclosure with interior bottom Tray-Drawer for use with a Propane Tank or Trash Bin. Included is the Removable Top Counter Rail, allowing you to make your counter as either Standard Bevel Edge or when removed make counter a Full Bull-nose edge. The cabinet is Fully Assembled, only requiring to fasten on the four included Peg-Legs, screw in place each 304 SS Rod Handles and mount the Front and Back Kick-Plates. For easy utility installation there are multiple side and one large single bottom access port, covered by black Snap-in plastic covers which allows unit to stay as tightly sealed as possible without compromising integrity of the cabinet.
Lifetime structure warranty.
304 Stainless steel structure.
Optional wheel casters.
Replaceable face panel.
Comes with trim kit SCC20CTK3.75
DOES NOT INCLUDE SIDE PANELS & SIDE KICK PLATES
Compatible with most Double Side Burners and Cocktail Stations with Cut-Out Dimensions between 9-3/4" to 14-1/2" Width and 8" to 10-1/4" Height by swapping out the specific Trim-Kits which are included as part of your purchase. The specific Grill Cut-Out Depth is adjustable from 17" Minimum to a Maximum of 24-1/2" Depth. IMPORTANT!!! – All Cut-Out Height Dimensions are Measured with a Minimum 3/4" Counter Top included, additional height may be adjusted by adding Hardy or Plywood Board. (Any additional Trim-Kit required to fit you’re your chosen product option will be included as part of your purchase at no additional charge.)
Sunstone Appliance Base Cabinet is entirely built with 304 Stainless Steel 16 and 18 Gauge Material Grades, and is uniquely designed to receive multiple Types of either Gas Double Side Burners or for use with many Slide-In Cocktail Bar Stations right out of the box and with easy installation with simple Pin-Lock installation - No Tools Required. - SAC20CSDL