Sunstone 30" Stainless Steel Appliance Cabinet for up to 21" Wide Fridge
Model #: SAC30APC
The Cabinet is designed to insulate the Appliance on the Three Left, Right and Back sides and is Open at the Base and the Front. There is a convenient Electrical Cover in front on Left Side Panel, for use as an Outlet or Light Switch. Included on the back interior panel is a 1-Gang Electrical Box ready a recommended GFCI outlet. The cabinet is easy to install with simple Pin-Lock installation - No Tools Required. Included is the Removable Top Counter Rail, allowing you to make your counter as either Standard Bevel Edge or when removed make counter a Full Bull-nose edge. The cabinet is Fully Assembled, only requiring to fasten on the four included Peg-Legs and mount the Front and Back Kick-Plates. For easy utility installation there are multiple side ports covered by black Snap-in plastic covers which allows unit to stay as tightly sealed as possible without compromising integrity of the cabinet.
Lifetime structure warranty.
304 Stainless steel structure.
Removable counter rail.
Optional wheel casters.
Replaceable face panel.
Back panel electric box.
Works with up to 21" Wide Fridges, Wine Coolers and Ice Makers.
DOES NOT INCLUDE SIDE PANELS & SIDE KICK PLATES
Compatible with most Compact Fridges, Ice Makers and Beverage Centers with a Maximum Dimensions of 21" Width and a Minimum of 33-1/4" Height. The Cabinet Allows for a Maximum of 25-1/4" Depth while still allowing for Electrical Access. IMPORTANT!!! – If additional height is required for Appliance, all Cabinet Peg-Legs are adjustable within an additional 1-1/2", making the Maximum adjusted allowance to be 34-3/4" Height. Be sure to adjust all other corresponding cabinets to the matching adjusted height.
Sunstone 30-inch Appliance Base Cabinet is entirely built with 304 Stainless Steel 16 and 18 Gauge Material Grades, and is uniquely designed to receive up to 21-inch Wide Fridges, Wine Coolers and Ice Makers. - SAC30APC