Sunstone 34-inch Gas Grill Base Cabinet is entirely built with 304 Stainless Steel 16 and 18 Gauge Material Grades, and is uniquely designed to receive multiple Gas Grill Brand Models right out of the box and with easy installation with simple Pin-Lock installation - No Tools Required. - SAC34GLPCD
Model #: SAC34GLPCD
This cabinet can accept most Built-In Gas Grills including:
This Cabinet comes standard with a Right Side Door Enclosure with interior bottom Tray-Drawer for use with a Propane Tank or Trash Bin while the Left side has Two Large Drawers with Ample Storage Space for all your BBQ Utensils, Rubs and Sauces. Included is the Removable Top Counter Rail, allowing you to make your counter as either Standard Bevel Edge or when removed make counter a Full Bull-nose edge. The cabinet is Fully Assembled, only requiring to fasten on the four included Peg-Legs, screw in place each 304 SS Rod Handles and mount the Front and Back Kick-Plates. For easy utility installation there are multiple access ports, covered by black Snap-in plastic covers which allows unit to stay as tightly sealed as possible without compromising integrity of the cabinet.
Lifetime structure warranty.
304 Stainless steel structure.
Optional wheel casters.
Replaceable face panel.
Soft-close drawer tracks.
DOES NOT INCLUDE SIDE PANELS & SIDE KICK PLATES
Compatible with most Gas Grills with Cut-Out Dimensions between 23-7/8” to 28-1/2" Width and 8" to 10-1/4" Height by swapping out the specific Trim-Kits which are NOT included as part of your purchase. The specific Grill Cut-Out Depth is adjustable from 17" Minimum to a Maximum of 24-1/2" Depth. IMPORTANT!!! – All Cut-Out Height Dimensions are Measured with a Minimum 3/4" Counter Top included, additional height may be adjusted by adding Hardy or Plywood Board.